Panasonic AJ-D650 - Manual (Page 30)

Setup (setting) menus
controller.
0: 20 25H
USER menu
(continued)
Item Setting
No. Superimposed No. Superimposed
Description
display display
1 1 2 AUTO REW 0000 OFF This selects whether to rewind the tape automatically to the
0001
ON tape start when the tape end is detected.
0: The tape stops at the tape end.
1: The tape is rewound to the tape start.
113 MEMORY 0000 OFF This selects whether the VTR is to stop automatically when
STOP 0001
ON the counter value reaches “0” during a fast forwarding or
rewinding operation in the CTL mode.
0: The VTR does not stop.
1 : The VTR stops automatically.
1. The stop mode concerned is either the stop or the still-
picture (SHTL STILL) mode depending on the setup menu
No. 313 (AFTER CUE-UP) setting.
2. When both the AUTO REW function and MEMORY
function have been selected at the same time, the AUTO
REW function takes precedence.
The underline on the setting item denotes the initial setting.
USER menu
Item Setting
No. Superimposed No. Superimposed
Description
display display
201 9P SEL 0000 OFF This selects whether the 9P connector functions when the
0001 ON REMOTE/LOCAL switch has been set to REMOTE.
0: Do not function
1: Function
This selects the ID information which is returned to the
1: DVCPRO’s, own ID is returned (F0 33H).
The underline on the setting item denotes the initial setting.
202 ID SEL 0000 OTHER
0001 DVCPRO
– 3 0 –