Panasonic AJ-D650 - Manual (Page 29)

USER menu
(continued)
Item Setting
No. Superimposed No. Superimposed
Description
display display
102 FF. REW 0000 X 32 This sets the maximum speed for FF and REW operations.
MAX 0001 X 60 0: 32× normal speed
0002 X 100 1: 60× normal speed
2: 100× normal speed
During DV format, the maximum speed is 32× normal speed
regardless of this setting.
103 AUDIO 0000
MUTE 0001
1 0 4 R E F
ALARM
106 PLAY
DELAY
0000
0001
0000
0015
OFF This sets the status until the audio signal is output when
ON operation switches from the stop or search modes to the play
mode.
0: The time until the audio is output is shortened.
1: The audio is output after the status stabilizes.
When set to 0 (OFF), the sound in the initially output part is
incomplete. Therefore, this setting is not recommended for
broadcasts.
OFF This selects whether to warn the operator when the
ON REF.VIDEO signal has not been connected.
0: Warning is not given.
1: Warning is given by the flashing STOP lamp.
0 This sets the play delay time in frame increments.
15
107 CAP. LOCK 0000 2F This selects the capstan lock mode.
0001 4 F 0: 2F mode
1: 4F mode
108 FORMAT 0000 DVCPRO This selects the format which applies when the general
SEL 0001 DV purpose cassette is used. After selection, this status becomes
effective only when the cassette is inserted after ejection.
0: DVCPRO mode
1: DV mode
109 EJECT EE
SEL 0000
0001
Take care not to insert a tape whose format is the reverse of
the one selected since the following trouble as well as playback
trouble will occur.
1. A recording operation is initiated if a DV cassette is inserted
when the DVCPRO mode is selected.
No guarantees can be made for performance, etc.
Conversely, no recording can be conducted if a DVCPRO
cassette is inserted when the DV mode is selected.
2. The REMAIN display loses its accuracy.
3. The accuracy of the slowdown position near the start and
end of the tape is lost.
EE This selects whether EE mode or BLACK is to be used during
BLACK EJECT status
0: EE mode
1: Video blackens, audio mutes.
110 F/R EE SEL 0000 EE This selects whether EE mode or playback mode is to be
0001 TAPE used during FF/REW operations.
0: EE mode
1: Playback mode
111 STOP EE 0000 EE This selects whether EE mode or playback mode is to be
SEL 0001 TAPE used during stop mode.
0: EE mode
1: Playback mode
The STAND-BY OFF mode complies with the above selection.
When TAPE is selected, however, the video becomes grey.
The underline on the setting item denotes the initial setting.
– 2 9 –