Panasonic AJ-D650 - Manual (Page 31)

USER menu
< E D I T >
Item Setting
No. Superimposed No. Superimposed
Description
display display
3 0 0 VAR 0000 – 0.43 – 1
This sets the VAR speed range.
RANGE 0001 – 4 – +4 0: The tape is played in slow motion at a speed ranging from
– 0.43× to +1× normal speed.
1: The tape is played in the ±4.1× normal speed range.
Phase synchronization from the editing controller is no longer
possible once this item has been set to “0”.
For DV format:
When using the dial on the front panel, playback is always
performed at – 0.5 to +1× normal speed regardless of the
menu setting.
When using the 9P:
When 0 is selected, playback is performed at – 0.5 to +1×
normal speed.
When 1 is selected, playback is performed at – 3.1 to +3.1×
normal speed.
3 0 3 STD/ 0000 AUTO This selects STD or NON-STD in accordance with the
NON-STD 0001 STD composite input signal.
0002 N-STD 0: Standard/non-standard signals are automatically identified
and processed.
1: Standard signals are processed. (Forced STD)
2: Non-standard signals are processed. (Forced NON-STD)
304 SERVO 0000 AUTO This selects the video signal processing.
REF 0001 EXT 0: Servo is synchronized with the input signal during recording
and editing, or with the REF signal during playback.
1: Servo is synchronized at all times with the REF signal.
305* EDIT 0000 N-DEF This sets the channel assignments for the controller’s analog
RPLCE1 0001 CH1 audio preset when editing the digital audio of the VTR using a
0002 CH2 controller which does not have a digital audio edit preset
0003 CH1+2 control function.
This selects the channel concerned when the VTR CH1 edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
3 0 6 * EDIT 0000 N-DEF This sets the channel assignments for the controller’s analog
RPLCE2 0001 CH1 audio preset when editing the digital audio of the VTR using a
0002 CH2
controller which does not have a digital audio edit preset
0003 CH1+2
control function.
This selects the channel concerned when the VTR CH2 edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
The underline on the setting item denotes the initial setting.
* The Setup menu can only be displayed for the model AJ-D650.
– 3 1 –