Panasonic AJ-D650 - Manual (Page 50)

Connector signals
RS-232C REMOTE (25-pin D-SUB straight cable supported)
Pin No. Abbreviation Circuit Description
1 FRAME GROUND Protective ground Frame ground
2 T×D Transmitted data Receives data from the PC.
3 R×D Received data Sends data to the PC.
4 RTS Request to send Shorted with pin 4.
5 CTS Clear to send Shorted with pin 5.
6 DSR Data set ready
Positive power output after communication enable
status
7 GND Signal ground Signal ground
20 DTR Data terminal ready No processing
• Example of connections with controller (PC) using a 25-pin D-SUB straight cable
PC end (D-SUB 25 pins) VTR end (D-SUB 25 pins)
FG 1
T×D 2
R×D 3
RTS 4
CTS 5
DSR 6
GND 7
DTR 20
1
2
3
4
5
6
7
20
FG
T×D
RxD
RTS
CTS
DSR
GND
DTR
ENCODER REMOTE (15P)
Pin No. Signal Pin No. Signal Pin No. Signal
1 6 SYSTEM H 11 RET GND
2 SET UP 7 SYS.SC COARSE (2) 12
3 C LEVEL 8 –12V 13
4 GND 9 HUE 14 SYS.SC FINE
5 +12V 10 VIDEO LEVEL 15 SYS.SC COARSE (1)
– 5 0 –