Paxar 9400 - Manual (Page 8)

2. If you see the supply type prompt:
Select Supply Type: B
A)lign, B)lack Mark or D)ie Cut
•
Press
E
for black-mark or aperture supplies.
•
Type D and press
E
for die-cut supplies.
3. If you see the date prompt:
Enter new date: 01/01/89
(MM/DD/YY)
•
Press
E
only to keep the date shown, or to skip the
prompt.
•
Enter a new date in the format shown in parentheses,
and press
E . The date format is selected in Printer
Configuration by management.
MM = 2 digit month
DD = 2 digit day
YY = 2 digit year
The date advances only while the power is on. During
printing, the slashes (/) are automatically generated.
9400 Series Operator’s Handbook
1-2