Paxar 9400 - Manual (Page 26)

Quantity to Print [1-9999]:____ Enter a number from
1-9999 and press
E
.
Type the number of tags,
or sets of tags you want to
be printed in a batch. For
example, if you choose a
cut multiple of 1 with a
batch quantity of 30, you’ll
print 30 tags. If you
choose a print multiple of 2
with a batch quantity of 30,
you’ll print 60 tags (30
sets
of tags with 2 tags per set).
6. Enter the batch data by answering the rest of the prompts.
7. After you enter data for each prompted field, the batch
data is sent to the print queue. The print queue contains a
list of batches waiting to be printed. If there are no other
batches in the print queue, your batch begins printing
immediately. When you see the format/batch screen again
(below), you can either:
Format: NAME
Enter Batch Name:__________
•
Repeat Steps 1-7 to enter another batch. If you are
changing to a different format, see "Changing Formats
and Supplies" later in this section.
•
Press S to stop the batch now printing. Press
S again to resume printing.
•
Go to Batch Control to check or change the status of a
batch in the print queue. You can cancel a batch that is
in the print queue, or reprint the last batch that printed.
See Section 3, "Monitoring Batch Printing."
9400 Series Operator’s Handbook
2-8