Paxar 9400 - Manual (Page 34)

2. Press
D
until you see Define Supply Type, then press
E . You’ll see
Select Supply Type: B
A)lign, B)lack Mark or D)ie Cut
3. Type A and press E .
Adjusting the Print Contrast
You can adjust the print contrast to darken or lighten printing.
You can also print a test tag to check the adjustments you
make. The adjustment range is from -99 (lighter) to +20
(darker).
NOTE: The normal print contrast setting (+00) prints
accurate bar codes on most tag or label stock. If
you change the print contrast, use a bar code
verifier to be sure your bar codes scan correctly.
1. From the main menu, press U or D to display Data
Entry.
Press
E
. You’ll see
Data Entry Mode
↓
Select Format: NAME __
2. Press
#
. You’ll see
Enter password:_ _ _ _ _ _ _ _
3. Type the 1-8 character password and press
E
.
9400 Series Operator’s Handbook
2-16