Paxar 9400 - Manual (Page 45)

5. Setting Printer Options
The printer has certain options that are set at the factory. You
can change the settings to fit the way you use your printer
most often. The options and their factory settings are shown
below.
Printer Option Default
1. Use Batch Separators No
2. Adjust Cut Position Increase at 0
3. Adjust Print Position Increase at 0
4. Define Cost Code None set
5. Define Supply Type Black Mark/Aperture
6. Define Monetary Symbol Dollar ($)
7. Use Cent Sign in Price Fields No
8. Define Numbering System English
9. Define Print Mode Continuous*
10. Use Batch Names No
The procedure for changing each of these values is listed
separately in this section.
* If your printer has a knife, Continuous is the only option for
Define Print Mode.
If your printer does not have a knife, the options for Define
Print Mode are
Continuous and On Demand. The default
is Continuous.
Using Batch Separators
This feature lets you use batch separators. You can use batch
separators with or without a stacker. For the 920 stacker, a
regular length tag with a black stripe is printed. For the 924
stacker, a double length tag with no stripe is printed. The
printer default is No batch separators.
S
e
tti
n
g
Pr
in
te
r O
p
tio
n
s
5-1