Paxar 9400 - Manual (Page 46)

1. From the main menu select Printer Options and press
E .
2. When you see
Select Printer Option:
↓
Use Batch Separators __
Press
E
to select this option.
3. You’ll see
Use Batch Separators [Y/N]: N
Press E if you don’t want to use batch separators.
The screen shows the Print Option menu.
Or, type Y to use batch separators, and press
E
. The
screen shows:
Adjust Separator Length [Y/N]: N
4. Press E if you don’t want the batch separator to be
3mm longer than a normal tag.
Or, type Y and press
E
if you do want the batch
separator to be 3mm longer than a normal tag. The
screen shows the Print Option menu.
NOTE: If you are using batch separators on a 924
stacker, you will always get a double length tag
(with no stripe). Entering Y at the Adjust
Separator Length [Y/N] prompt does to affect
the length of the separator tag.
9400 Series Operator’s Handbook
5-2