PC Concepts Full-Rated Router ADSL2+ - Manual (Page 95)

94
Follow these instructions to begin the diagnostic tests:
(1) If the Diagnostics page is not currently displayed, click the Admin tab, and then click
Diagnostics in the task bar.
(2) From the WAN Interface drop-down list, select the name of the WAN interface on
which the diagnostics are to be run.
(3) Click Submit.
(4) The diagnostics utility will run a series of tests to check whether the device's
connections are up and working. This will take only a few seconds.
(5) The program will report whether the test passed, failed, or was skipped. A test may
be skipped if the program determines that no suitable interface is configured on
which to run the test.