PC Concepts Full-Rated Router ADSL2+ - Manual (Page 101)

100
(3) Click the Enable radio button.
(4) Click Submit.
A page will display briefly to confirm your changes. Autodetect will not start
searching for a valid connection until the modem is rebooted.
(5) Click Reset.
A warning message will display to inform you that the current configuration will
be lost.
(6) Click OK.
The modem will reboot and the Web-based interface will be temporarily
unavailable. Upon reboot, Autodetect will begin searching for a valid VC and
will create a PPP, an EoA, or an IPoA interface on your modem corresponding
to the type of interface detected on the access server. You can monitor the
success or failure of the Autodetect process by displaying the System Log
page in the Admin tab.
5.8.12 SNMP Configuration
The Simple Network Management Protocol (SNMP) enables a host computer to access
configuration, performance, and other system data that resides in a database on the modem.
The host computer is called a management station and the modem is called an SNMP agent.
The data that can be accessed via SNMP is stored in a Management Information Database
(MIB) on the modem.