PC Concepts Full-Rated Router ADSL2+ - Manual (Page 12)

11
4. Connecting ADSL Router via Ethernet and USB
You can connect this ADSL Router with PC through Ethernet cable or USB cable. After
connect is established, you can configure the host PC to be a DHCP client. You have to repeat
the same steps for every host PC on your network if you user DHCP function on your router.
4.1 Setup ADSL router via Ethernet Cable
If there is an available LAN card present on your PC, you just simply connect ADSL
router and PC through the Ethernet cable. Once you establish Internet connection, you could
browse the Web through the Ethernet cable.
4.2 Setup ADSL router via USB Cable
You can connect ADSL router with PC via USB cable when there is no LAN Card present
on your PC. USB cable acts as another LAN connection in this scenario. Once you establish
Internet connection, you could browse the Web through the USB cable.
USB Device Driver Installation for Windows OS (Win98SE/ME/2000/XP)
Step 1 : Connect ADSL Router and PC with USB cable.
Step 2 : Once “Found New Hardware Wizard” window pop out, click “Cancel”.