PC Concepts Full-Rated Router ADSL2+ - Manual (Page 38)

37
5.2.3 Quick Configuration
The Quick Configuration displays the settings you are most likely to need to change
when you first set up your ADSL/Ethernet router. Work with your ISP to determine the values
or settings you need to change. NOTE: It is a strong recommendation that using Quick
Configuration to set your ADSL settings.
z ATM Interface: Selects the ATM interface you want to use (usually 0). Your system may
be configured with more than one ATM interface if you are using different types of
services with your ISP.
z Operation Mode: Enables or disables the device. When set to "Disabled", the device
cannot be used to provide Internet connectivity or routing services for your network.
z Encapsulation: Determines the type of data link used to communicate with your ISP.