Pioneer BDP-320 - Manual (Page 48)

06
48
En
Note
• Only com patible with 7.1-channel surround back. 6.1-channel surround back is output in 7.1 channels. In other
cases, out put as audio signals of 5.1-channels or less.
• When out putting linear PCM audio signals, if the number of compatible channels of the connected HDMI device
is lowe r, the signals are output with the number of channels for which the device is compatible.
• The audio signals out put from the DIGITAL OUT terminal have a sampling frequency of 48 kHz (44.1 kHz for audio
CDs).
9. When the out put video resolution is set to 480i or 480p, the signals may be output in linear PCM (2 channels) or Dolby Digital bitstream,
de pending on HDMI High Speed Transmission setting and/or the connected HDMI device (page 14).
10. If the connected HDMI device is not com patible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the signals are output in
linea r PCM (7.1 channels) or DTS Digital Surround bitstream.
If the connected HDMI device is not com patible with DTS Digital Surround bitstream, the signals are output in linear PCM (2 channels).
11. When the out put video resolution is set to 480i or 480p, the signals may be output in linear PCM (2 channels) or DTS Digital Surround,
de pending on HDMI High Speed Transmission setting and/or the connected HDMI device.
320_UXJCA_EN.book 48 ページ ２００９年２月１３日 金曜日 午後４時２６分