Pioneer BDP-LX71 - Manual

02
Notice on the Addition of Functions
In addition to the functions described in the operating instructions, there are a number of other functions that have been added. These new
functions are described in this notice. Also refer to the included operating instructions.
The additional functions are as follows:
• DTS-HD audio output
• Speaker Setup
• Image file playback
• External subtitle files for DivX files
Caution
• The addition of the functions resets the speaker settings. To use 7.1-channel analog output signals, check the speaker settings.
DTS-HD audio output
Output of the DTS Digital Surround and DTS-HD (DTS-HD High Resolution Audio and DTS-HD Master Audio) signals recorded on BD-ROMs
has changed.
• Before the function was added, the DTS Digital Surround signals included within the DTS-HD signals were converted to linear PCM or
analog audio signals for output. With the addition of the function, the DTS-HD signals are converted into linear PCM or analog audio
signals for output.
• When using with a 7.1-channel speaker system, DTS Digital Surround signals are output in up to 7.1 channels.
For details, refer to the table below.
Changes are indicated in bold.
Caution
• The output from all terminals other than the ones selected for Audio does not sound as intended by the content provider.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD
and DTS-HD Master Audio | Essential are trademarks of DTS, Inc.
© 1996-2008 DTS, Inc. All Rights Reserved.
Audio format
AUDIO OUT terminals DIGITAL OUT terminals HDMI OUT terminal 1
1. When outputting linear PCM audio signals, if the number of compatible channels of the connected HDMI device is lower, the signals are output with the number of
channels for which the device is compatible.
2ch 2
2. When Audio Output Mode is set to 2 Channel or Multi-channel.
Multi-channel 2
Converted to
linear PCM audio 3
3. When DTS Out is set to DTS  PCM.
Not converted to
linear PCM
audio 4,5
4. When DTS Out is set to DTS 1/DTS 2.
5. When outputting DTS Digital Surround bitstream with settings of DTS 2 at DTS Out, the secondary audio and interactive audio signals are not mixed for output.
PCM 6
6. When HDMI Audio Out is set to PCM or Auto.
Auto 6,7,8
7. When outputting the bitstream of DTS-HD Master Audio, DTS-HD High Resolution Audio or DTS Digital Surround, the secondary audio and interactive audio signals
are not mixed.
8. If the connected HDMI device is not compatible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the signals are output in DTS Digital Surround
bitstream.
If the connected HDMI device is not compatible with DTS Digital Surround bitstream, the signals are output in linear PCM.
BD-ROM DTS Digital
Surround
Converted to
2-channel audio
7.1-channel
audio 9
Converted to
2-channel audio
DTS Digital
Surround
7.1-channel
audio 9
9. Only compatible with 7.1-channel surround back. 6.1-channel surround back is output in 7.1 channels. In other cases, output as audio signals of 5.1-channels or less.
DTS Digital
Surround
DTS-HD High
Resolution Audio
7.1-channel
audio 9,10
10. When the output video resolution is set to 576i/480i or 576p/480p, the signals may be output in 2 channel, depending on the HDMI High Speed Transmission setting
and/or the connected HDMI device.
DTS-HD High
Resolution Audio
DTS-HD Master
Audio DTS-HD Master
Audio 11
11. When the output video resolution is set to 576i/480i or 576p/480p, the signals may be output in DTS Digital Surround bitstream, depending on the HDMI High Speed
Transmission setting and/or the connected HDMI device.
< VRY1204-A >
2G_versionup_en_wv_ibd.fm 1 ページ ２００９年４月２３日 木曜日 午後６時１３分