Pioneer BDP-320 - Manual (Page 47)

47
En
06
About the audio output settings
The audio signals that a re output differ according to the audio format recorded on the disc and the player’s settings.
Check on the table below.
Caution
• When ANALOG AUDIO is selected at Output Terminal, no audio signals are output from the HDMI OUT terminal
o r DIGITAL OUT terminal (pages 19 and 46).
• When HDMI or DIGITAL AUDIO is selected at Output Terminal, linear PCM audio signals (2 channels) are output
f rom all terminals other than the ones selected at Output Terminal (pages 19 and 46).
• The output from all terminals other than the ones selected for Audio does not sound as intended by the content
provider.
Audio format
AUDIO OUT terminals DIGITAL OUT terminal HDMI OUT terminal
2ch 1
1. When Audio Output Mode is set to 2 Channel or Multi-channel (page 38).
Multi-channel 1
Converted to
linear PCM
audio 2
2. When Dolby Digital Out is set to Dolby Digital  PCM, DTS Out is set to DTS  PCM, or AAC Out is set to AAC  PCM (page 38).
Not converted
to linear PCM
audio 3
3. When Dolby Digital Out is set to Dolby Digital 1/Dolby Digital 2, DTS Out is set to DTS 1/DTS 2 or AAC Out is set to AAC (page 38).
PCM 4
4. When HDMI Audio Out is set to PCM or Auto (page 39).
Auto 4
BD-
ROM Dolby Digital
Conve rted to 2-
channel audio
5.1-channel
audio
Conve rted to 2-
channel audio
Dolby Digital 5
5. When out putting Dolby Digital or DTS Digital Surround bitstream with Dolby Digital Out set to Dolby Digital 2 and DTS Out set to DTS
2, the secondary audio and interactive audio signals are not mixed for output.
5.1-channel
audio
Dolby Digital 6,7
6. When out putting the bitstream of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD Master Audio, DTS-HD High Resolution Audio
o r DTS Digital Surround, the secondary audio and interactive audio signals are not mixed for output.
7. If the connected HDMI device is not com patible with Dolby TrueHD or Dolby Digital Plus bitstream, the signals are output in linear PCM (7.1
channels) o r Dolby Digital bitstream.
If the connected HDMI device is not com patible with Dolby Digital bitstream, the signals are output in linear PCM (2 channels).
Dolby Digital
Plus
7.1-channel
audio
7.1-channel
audio
Dolby Digital
Plus 6,7
Dolby T rueHD 7.1-channel
audio 8
8. When the out put video resolution is set to 480i or 480p, the signals may be output in linear PCM (2 channels), depending on HDMI High
Speed Transmission setting and/or the connected HDMI device (page 14).
Dolby
T rueHD 6,7,9
DTS Digital
Su
rround
7.1-channel
audio
DTS Digital
Su rround 5
7.1-channel
audio
DTS Digital
Su rround 6,10
DTS-HD High
Resolution
Audio
7.1-channel
audio
7.1-channel
audio 8
DTS-HD High
Resolution
Audio 6,8,10
DTS-HD Maste r
Audio
DTS-HD Maste r
Audio 6,10,11
Linea r PCM Conve rted to 2-
channel audio
7.1-channel audio 8
BD-R/
-RE Dolby Digital
Conve rted to 2-
channel audio
5.1-channel
audio
Conve rted to 2-
channel audio
Dolby Digital 5.1-channel
audio
Dolby Digital
7
MPEG-2 AAC MPEG-2 AAC MPEG-2 AAC
MPEG
2-channel audio
Linea r PCM
DVD-
Video Dolby Digital
Conve rted to 2-
channel audio
5.1-channel
audio
Conve rted to 2-
channel audio
Dolby Digital
5.1-channel
audio
Dolby Digital 7
DTS Digital
Su
rround
DTS Digital
Su rround
DTS Digital
Su rround 10
MPEG
2-channel audio
Linea r PCM
DVD-R/
-RW
(VR
fo
rmat)
Dolby Digital Conve rted to 2-
channel audio
5.1-channel
audio
Conve rted to 2-
channel audio
Dolby Digital
5.1-channel
audio
Dolby Digital 7
MPEG
2-channel audio
Linea r PCM
320_UXJCA_EN.book 47 ページ ２００９年２月１３日 金曜日 午後４時２６分