Panasonic AJ- E - Manual (Page 62)

Chapter 5 Preparation
62
5
Proceed with the flange back adjustment for the lens.
≥
For details on how to handle the lens, refer to the
operating instructions of the lens.
≥ While the lens is removed, attach the mount cap to
protect the unit.
5-3 Attaching the lens and performing
the flange back and white shading
adjustments
Attaching the lens
1
Raise the lever for securing the lens, and detach the
mount cap.
Lever for
securing the lens
Mount cap
Mark
2
Align the center mark of the lens with the groove in the
top center of the lens mount, and attach the lens.
4
Push the cable into the cable clamp, and connect it to the
LENS socket.
3
Push down the lever for securing the lens to secure the
lens.
LENS socket