Pitney Bowes DM400C - Manual (Page 165)

12-15
12 • Maintenance
SV62261 Rev. A
Replacing the Print Head
Follow the steps below to change in print head on your system.
1. Navigate through the menus to perform the replacement proce-
dure:
A. Press
Menu.
B. If necessary, press the green down arrow key to scroll
through the menu screens.
C. Select "Maintenance".
D. Select "Printer Maintenance".
E. Select "Replace Print Head".
2. Remove the ink cartridge. Refer to steps 2-4 in Replacing the Ink
Cartridge in this chapter for more information.
3. Squeeze the two gray tabs on either side of the print head.
3. While squeezing, lift and tilt to the right the print head. The print
head should come up out of the machine.
Printer Maintenance (cont'd)