Pitney Bowes DM400C - Manual (Page 161)

12-11
12 • Maintenance
SV62261 Rev. A
5. Clean the brush in plain wa ter, and rinse thoroughly.
6. Position the brush as shown at
right so its bottom edge is under
the mounting tabs.
7. Slide the brush back toward the
rear of the moistener.
8. If you need to clean the wick and holder, continue with Remov-
ing the Holder and Wick procedure on the next page. Otherwise,
push down on the blue re lease lever on the moistener.
CLICK!
Release
Lever
9. Slide the moistener back onto the machine. You should hear a
click as it engages.
Maintaining the Moistener (cont'd)
Removing the Moistener (DM300c) (continued)