Panduit DPOE24S1X - Manual (Page 61)

PANDUIT ® DPoE™ Power Patch Panel User’s Guide Issue 2.2
Part Number: PN378A
60
15. Attach the top and bottom rear shields to the panel using the tabs on the shields. Be sure that the
compliant conductive foam on the shields is in contact with the copper tape applied to the cables.
Close the shields together over the cables and secure with P
AN
-T
Y
's (PANDUIT part no. PLT1.5I-
M). Fasten the shields together using US standard screws with the grounding strap in-between
the screw and the shields.
16. Secure the cables to the shield tabs with the remaining P
AN
-T
Y
's.