Panduit DPOE24S1X - Manual (Page 10)

PANDUIT® DPoE™ Power Patch Panel User’s Guide Issue 2.2
Part Number: PN378A
9
Item Quantity Notes
Quick Installation Instructions 1 PANDUIT Part Number PN370
DPOE™ Installation Worksheet 1 PANDUIT Part Number PN377
Metric and English screws 12 Installation requires six screws.
One bag of six metric screws
(M6x1.0x16) and one bag of six
English screws (12-24x1/2”) are
included.
8 inch grounding strap 1
DPoE™ Power Patch Panel Support Tools CD-
ROM containing:
- PANDUIT ® Element Manager (EM)
software.
- DPoE™ Power Patch Panel Users Guide
(this document)
- Release Notes
- Application Notes
- Installation Guides
1
Power connector housing with wire leads 1 This wiring harness is used to
connect the DPoE™ Power Patch
Panel to the 48VDC power
supply. Not used if the panel is
powered by the PANDUIT Power
Brick (PANDUIT Part Number
DPOEPWRB120 or
DPOEPWRB120Y.)
10 Foot Power Harness 1 Used to connect the –48V A-feed
to a power supply.
Butt splices 2 Two butt splices may be used to
extend the 10 Foot Power
Harness. (Do not exceed a total
length of 35 feet).
Verify the above contents arrived in good condition. If not, contact PANDUIT Technical Support.
Table 3: PANDUIT Corporation Contact Information
PANDUIT Technical Support Fax: 1-708-444-6993
E-mail: [email protected]
For Installation Instructions in Local Languages
and Technical Support www.panduit.com/resources/install_maintain.asp
Worldwide Subsidiaries and Sales Offices www.panduit.com
Latest Software Updates www.panduit.com/managednetworksolutions