Pioneer Elite VSX-23TXH - Manual (Page 106)

Additional information 12
106
En
SIRIUS radio messages
If the problem is not solved after the troubleshooting above, if the screen freezes unexpectedly or if the buttons on the
remote control or front panel stop working completely, do the following:
• Press  STANDBY/ON on the front panel to turn off the power, then turn the power back on.
• If the power cannot be turned off, press and hold  STANDBY/ON on the front panel for over 10 seconds. The
power will turn off. (In this case, the various settings made on the receiver may be cleared.)
CH Unauthorized You selected an XM channel that is blocked or
cannot be received with your XM subscription
package. Consult the latest channel guide at
www.xmradio.com for the current list of channels.
For information on receiving this channel, visit
www.xmradio.com or contact XM Satellite Radio at
1-800-967-2346.
CH Unavailable The selected channel is not available. The channel
may have been reassigned to a different channel
number.
This message may occur initially with a new radio or
a radio that has not received XM’s signal for an
extended period. Consult the latest channel guide at
www.xmradio.com for the current list of channels.
For cases of a new radio or a radio that has not
received XM’s signal for an extended period, allow
the radio to receive the XM satellite signal for at least
5 minutes and then try to select the channel again.
– – – – – – – – No artist name or song title is available for this
selection. No action required.
Upgrade XM Tuner The connected XM CNP-1000 is incompatible. This
receiver features advanced technology that is
designed for use with the XM Mini-Tuner. Contact XM Listener Care (1-800-967-2346) and ask
about upgrading your XM CNP-1000 to an XM Mini-
Tuner.
Have this receiver’s model name and CNP-1000 XM
Radio ID number ready beforehand, and explain that
this receiver is displaying the message Upgrade XM
Tuner.
If you already have an XM Mini-Tuner connected and
you see this message, turn off this receiver, make
sure the XM Mini-Tuner is properly seated in the
Mini-Tuner Home Dock, and then turn this receiver
on again. If the message reappears, contact XM
Listener Care and explain the issue that you’re
experiencing and the corrective actions you’ve tried.
XM Power Error A short-circuit occurring in the antenna or
surrounding antenna cable. Make sure that there is nothing unusual with the
antenna or antenna cable. Switch the power off,
then back on again.
Message Cause Action
Antenna Error The SIRIUS antenna is not properly connected. Check that the antenna cable is attached securely.
Check Sirius Tuner The SiriusConnect™ tuner is not properly
connected. Check that the 8 pin mini DIN cable and AC Adapter
are attached securely.
Acquiring Signal The SIRIUS signal is too weak at the current location. Check for antenna obstructions and reposition the
SIRIUS antenna to get better signal reception. Use
the Antenna Aiming option to optimize the antenna
position.
Subscription Updating Unit is updating subscription. Wait until the encryption code has been updated.
Updating Channels Unit is updating channels. Wait until the encryption code has been updated.
Invalid Channel Selected channel is not available/does not exist. Select another channel.
Firmware Updating The SiriusConnect™ tuner’s firmware is being
updated. Wait for updating to finish.
Message Cause Action
VSX-23TXH_CUXJ.book 106 ページ ２００９年５月８日 金曜日 午前１０時４５分