Paxar 9430R - Manual (Page 41)

Control Characters A-1
C O N T R O L C H A R A C T E R S
The following characters are reserved and used to assist in printer
control. The printer also provides single byte responses to inform the
host of the printer status.
Character Control Hex / Dec Control Action
EOT ^D 0x04 / 04 End Of Text
Signals to the host device that the printer
is in idle mode and the print buffer is
empty.
BS ^H 0x08 / 08 Backspace
Removes the previous character in the
print buffer.
HT ^I 0x09 / 09 Horizontal Tab
Advances to the next tab position (from
the following list) or to the beginning of
the next line: 5, 9, 13, 17, 21, 25, 29, 33,
37.
LF ^J 0x0A / 10 Line Feed
Advances to beginning of next line.
VT ^K 0x0B / 11 Vertical Tab
Advances 5 lines.
FF ^L 0x0C / 12 Form Feed
Advances 10 lines.
CR ^M 0x0D / 13 Carriage Return
Advances to beginning of next line.
SO ^N 0x0E / 14 Shift Out
Switches to 24-column print mode
SI ^O 0x0F / 15 Shift In
Switches to 42-column print mode.
A