Paxar 9430R - Manual (Page 21)

Creating and Printing Formats 2-13
P o s i t i o n i n g F i e l d s
The following commands/control characters move the supply through the
printer to position the fields on the format. The data stream can also write
spaces to the printer before it prints text to position a field.
NOTE: There are .157-inch no-print zones on the image area’s right and
left sides and a .7-inch no-print zone at the top.
Command Summary
Command Description
D hex (CR) Advances to the beginning of the next line.
C hex (FF)
Advances 10 lines.
14 hex (Norm)/F hex (SI) Sets the printer to 42-column mode.
E hex (SO)
Sets the printer to 24-column mode.
B hex (VT) Advances 5 lines.
9 hex (HT) Tabs to the next position or the beginning of
the next line.
A hex (LF) Advances to the beginning of the next line.
ESC-'J'- Performs a specified number of line feeds.
1-FF The number of line feeds, specified in
hex. The default is 1 (.125 mm).