Paxar 9430R - Manual (Page 18)

2-10 Creating and Printing Formats
Command Summary
Command
Description
ESC-'z'--
--
Prints a bar code without human-readable
data.
ESC-'Z'--
--
Prints a bar code with human-readable data.
The type of bar code to print (values are the
ASCII representation, not hex).
'1' Code 39
'2' Code 128 (UCC/EAN-128)
'3' Interleaved 2 of 5
'4' UPC/EAN/JAN
'5' Codabar
The data length, specified in hex (01 – FF).
This value is dependent on the bar code you
choose with . See “Specifying
Particular Bar Codes.”
The bar code height, specified in hex, in
increments of .125 mm. can be no
smaller than 14. For example, 14 = 2.5 mm,
15 = 2.625 mm, etc.
For UPC/EAN/JAN bar codes, the height you
specify includes a 1.25 mm drop bar pattern
after the bar code.
(data) The data for the bar code. It must equal
. See “Specifying Particular Bar
Codes” for data restrictions, which vary by bar
code.
Example:
ESC-'Z'-'3'-08 hex-
50 hex-'12345678'
Prints an Interleaved 2 of 5 bar code, 10 mm
high, containing 12345678 as the data.