Paxar 9430R User Manual
Page 26
3-4 Configuring the Printer
Command Summary
Command
Description
ESC-'M'-
Sets the power-off timer’s inactivity period.
The first and second digits,
respectively, of the number of seconds
to set the inactivity period to. To
disable the timer, set both parameters
to 0.
Example:
ESC-M560-CR
Sets the inactivity period to 56 seconds.
ESC-'C'
Sets the inactivity period to the default (20
seconds).
NOTE: Be careful when using sleep mode with buffer mode. If there is
data in the print buffer when the printer goes into sleep mode, you
lose the data.
S u p p l y C o n t r o l C o m m a n d s
The commands in this section control how the printer uses black-mark
supplies.
Be aware of the features of your supplies (distance between black marks,
existence of any preprinted text, etc.) as you code these commands. For
example, you may have to code the black mark search command multiple
times if the marks are farther apart than the maximum search allows.
To use these commands:
1 . Set the sensitivity of the search mechanism in finding the black mark
(ESC-QQ command)
2 . Move the supplies forward (ESC-QF command) or backward (ESC-QB or
ESC-QJ commands) to find the black mark.
3 . Wait for a response from the printer (found or not found).
4 . Send a data stream with printing commands.