Paxar 9430R - Manual (Page 15)

Creating and Printing Formats 2-7
Command Description
ESC-'V'---
#data#
Prints a number of graphic lines (same
command for both data stream and flash
memory graphics).
and The hex digits (listed backward) of a number
indicating how many lines to print. For
example, to print 10 lines, is A, and
is 0.
#data# 72 hex bytes, indicating the dots to turn on or
off. For example, if a specified byte is FF, all
the dots are on. If it is 01, only one dot is on,
and the other 7 are off.
If you accidentally specify less than 72 bytes,
the printer does not print the graphic. If you
specify more than 72 bytes, a fatal exception
occurs.
NOTE: You are not directly specifying the bits turned on or off. You are
specifying the bits in groups of eight by using two digit hex values.