Panasonic DMR-ES20 EN - Manual (Page 37)

RQT8212
37
Con
ven
ie
nt f
unct
ions
EN
GL
IS
H 1
While stopped
Press [FUNCTIONS].
2
Press [ e, r] to select “To Others” and
press [ENTER].
3
Press [ e, r] to select “SETUP” and
press [ENTER].
4
Press [ e, r] to select “Tuning” and
press [ q].
You can add or delete channels, or change programme positions.
5
Press [ e, r] to select “Manual” and
press [ENTER].
To delete a programme position
Press [
e, r, w, q] to select a programme position and press [A].
To add a blank programme position
Press [
e, r, w, q] to select a programme position and press [B].
To move a TV station to another programme position
Press [ e, r, w, q] to select a programme position and press [C].
Press [ e, r, w, q] to select the new programme position to
which you want to assign the TV station and press [ENTER].
Note
If Preset Download ( ➔ page 10) has been performed, only deletion
of the programme position can be performed.
■ To change the tuning settings for individual
programme position
6
Press [ e, r, w, q] to select a
programme position and press
[ENTER].
Press [ e, r] to select an item and press [q].
You can make the following two settings by selecting the external
input channel (AV1, AV2, AV3, AV4) in step 5.
•
Video System (Auto/PAL/SECAM)
In order to record properly, make the appropriate settings to match
the connected equipment.
•
Title Page (Auto/Off)
Tuning
Manual
SETUP
Disc
Tuning
Manual
Auto-Setup Restart
Download from TV
Manual Tuning
Pos Name Ch Pos Name Ch
Delete
Add
Move
1
2
3
4 4
2
5
8
10 5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
ENTER
RETURN
SELECT
ARD
ZDF
N3
HR3
BR3
B C A
1
2
Pos
Name
Channel
Fine Tuning
Decoder
Video System
1
Off
4
Auto
RETURN : leave
Manual
Tuning
ARD
Auto
Audio Mode BG
Mono Off
Title Page 301
RETURN
CHANGE
Pos To change the programme position in which the
TV stations are assigned
Press [
e, r] or numbered buttons to select the
number of the desired programme position and
press [ENTER].
Name To enter or change the name of a TV station
Press [
e, r, w, q] to enter station name and press
[ENTER].
If the station name needs a blank space, select the
blank between “Z” and “ ”.
Channel To enter newly available TV stations or change
the channel number of an already tuned TV
station
Press [
e, r] or the numbered buttons to enter the
channel number of the desired TV station.
Wait a few moments until the desired TV station has
been tuned.
After the desired TV station is tuned, press
[ENTER].
Fine
Tuning To obtain the best tuning condition
Press [
e, r] to adjust the best tuning condition
and press [ENTER].
•
Press [ q] to return to “Auto”.
Decoder To preset pay TV stations
Press [
e, r] to select “On” and press [ENTER].
Video
System To select the video system type
Press [
e, r] to select “PAL” or “SECAM” if the
picture lacks colour, and press [ENTER].
Auto:
This unit automatically distinguishes PAL
and SECAM signals.
PAL: For receiving PAL signals.
SECAM: For receiving SECAM signals.
Audio
Mode To select the audio reception type
If sound quality is poor, press [
e, r] to select items
and press [ENTER].
BG: PAL B.G.H/SECAM B.G
L:
SECAM L,L’
Mono To select the type of sound to be recorded
Press [
e, r] to select “On” if the stereo sound is
distorted due to inferior reception conditions, or if
you want to record the normal (mono) sound during
a stereo, bilingual or NICAM broadcast, and press
[ENTER].
Title Page To enter the Teletext title page for a channel
Entering title page number allows the unit to
automatically record programme and station
names.
Press [
e, r] or numbered buttons to enter the
number and press [ENTER].
•
To find the correct title page for the station, refer to
its Teletext TV guide.