Panasonic DMR-ES20 EN - Manual (Page 13)

RQT8212
13
G
e
tti
n
g
st
art
e
d
EN
GL
IS
H You can configure the remote control TV operation buttons to turn
the television on/off, change the television input mode, select the
television channel and change the television volume.
Point the remote control at the television
While pressing [ ^ TV], enter the code with
the numbered buttons.
e.g., 01: [0] ➔ [1]
Manufacturer and Code No.
Test by turning on the television and changing channels. Repeat the
procedure until you find the code that allows correct operation.
•
If your television brand is not listed or if the code listed for your
television does not allow control of your television, this remote
control is not compatible with your television.
If other Panasonic products are placed close together, change the
remote control code on the main unit and the remote control (the
two must match).
Under normal circumstances use the factory set code “DVD 1”.
1
While stopped
Press [FUNCTIONS].
2
Press [ e, r] to select “To Others”
and press [ENTER].
3
Press [ e, r] to select “SETUP” and
press [ENTER].
4
Press [ e, r] to select “Others” and
press [ q].
5
Press [ e, r] to select “Remote
Control” and press [ENTER].
6
Press [ e, r] to select the code
(“DVD 1”, “DVD 2” or “DVD 3”) and
press [ENTER].
To change the code on the remote control
7
While pressing [ENTER], press and
hold the numbered button ([1], [2] or
[3]) for more than 2 seconds.
8
Press [ENTER].
■ When the following indicator appears on the
unit’s display
Note
Executing “Shipping Condition” in the SETUP menu returns the
main unit code to “DVD 1”. Change the remote control code to 1
(
➔ step 7).
Television operation
Brand Code Brand Code
Panasonic
01, 02, 03,
04, 45
NOKIA 25, 26, 27
AIWA 35 NORDMENDE 10
AKAI 27, 30 ORION 37
BLAUPUNKT 09 PHILIPS 05, 06
BRANDT 10, 15 PHONOLA 31, 33
BUSH 05, 06 PIONEER 38
CURTIS 31 PYE 05, 06
DESMET 05, 31, 33 RADIOLA 05, 06
DUAL 05, 06 SABA 10
ELEMIS 31 SALORA 26
FERGUSON 10 SAMSUNG 31, 32, 43
GOLDSTAR/LG 31 SANSUI 05, 31, 33
GOODMANS 05, 06, 31 SANYO 21
GRUNDIG 09 SBR 06
HITACHI
22, 23, 31,
40, 41, 42
SCHNEIDER
05, 06, 29,
30, 31
INNO HIT 34 SELECO 06, 25
IRRADIO 30 SHARP 18
ITT 25 SIEMENS 09
JVC 17, 39 SINUDYNE 05, 06, 33
LOEWE 07 SONY 08
METZ 28, 31 TELEFUNKEN
10, 11, 12,
13, 14
MITSUBISHI 06, 19, 20 THOMSON 10, 15, 44
MIVAR 24 TOSHIBA 16
NEC 36
WHITE
WESTINGHOUSE
05, 06
When other Panasonic products
respond to this remote control
SETUP Remote Control
Picture
Tuning
Disc
Press “ ” and “ENTER” together
for more than 2 seconds on the remote
control.
Press and hold [ENTER] and
the indicated number button at
the same time for more than 2
seconds.