Pentax 330RS - Manual (Page 36)

69
T
aking Pictures
68
T
aking Pictures
Setting the ISO Speed (ISO Speed)
You can select the ISO speed to suit the brightness of the sur-
roundings.
● ISO Speed
Auto The camera sets the speed automatically.
100 (430RS) Produces sharp images with little or no noise. Decreases the
125 (330RS) shutter speed in low light conditions.
200 (430RS) Increases the shutter speed in low light conditions but there is
250 (330RS) more risk of noise.
z
Select [ISO Speed] on the [Rec.Mode] menu.
x
Use the four-way controller ( )
to change the ISO speed.
c
Press the Playback/OK button.
The camera is ready to take the pic-
ture.
Saving the ISO Speed p.74
MENU OK
Memory
AE Metering
ISO Speed
Instant Review
0.5sec
100
Off
Exit Ok
Rec.Mode Set-up
Interval Shooting
Time-lapse Movie
(2/3)
2048 ×1536
MENU OK
Rec.Mode Memory Set-up
Recorded Pixels
Quality Level
White Balance
Multiple
On
Exit
Focusing Area
Digital Zoom
Ok
AWB
(1/3)
Menu button
Playback/OK button
Four-way controller
Setting the Light Metering Range to Determine the Exposure (AE Metering)
You can choose which part of the screen to use to measure the
brightness and determine the exposure.
Multi segment The exposure is determined by the entire screen.
Center-weighted The exposure is determined mainly by the center of the screen.
Spot The exposure is determined by the middle of the screen only.
z
Select [AE Metering] on the [Rec.Mode] menu.
x
Use the four-way controller ( )
to change the metering mode.
c
Press the Playback/OK button.
The camera is ready to take the pic-
ture.
Saving the AE Metering Method p.74
MENU OK
Memory
AE Metering
ISO Speed
Instant Review
0.5sec
Auto
Off
Exit Ok
Rec.Mode Set-up
Interval Shooting
Time-lapse Movie
(2/3)
2048 ×1536
MENU OK
Rec.Mode Memory Set-up
Recorded Pixels
Quality Level
White Balance
Multiple
On
Exit
Focusing Area
Digital Zoom
Ok
AWB
(1/3)
Menu button
Playback/OK button
Four-way controller
e04KB335_33e.qk 6/6/02 4:39 PM Page 68 (1,1)