Pentax Optio E50 - Manual (Page 74)

72
4
Tak
ing Pi
cture
s
Available in b R A q < I i \ E Y
You can select the sensitivity to suit the brightness of the surroundings.
Sensitivity
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Sensitivity].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the sensitivity.
5
Press the 4 button.
The Sensitivity setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
Setting the Sensitivity
Auto
Sensitivity is automatically adjusted between ISO XX – XX. (In Digital SR mode,
it is automatically adjusted within the range of ISO XX – XX.)
XX
• The lower the sensitivity, the less noise that affects the image. The
shutter speed will be slower in low light conditions.
• Higher sensitivity settings use faster shutter speeds in low light
conditions to reduce camera shake, but the image may be affected by
noise.
XX
XX
XX
XX
XX
• In c mode, the sensitivity is fixed at Auto (ISO XX– XX).
• In mode, the sensitivity is fixed at ISO XX.
Saving the Sensitivity 1p.79
Rec. Mode
MENU Exit Exit Exit
1/2
Recorded Pixels
Quality Level
AF Mode
Sensitivity
EV Compensation
Movie
Auto
±0
8 M
MENU
1, 6
2, 3, 4
5
MENU
1 / 2
OK O K
R e c . M o d e
C a n c e l
Recorded Pixels
Q u a l i t y L e v e l
A F M o d e
S e n s i t i v i t y
EV Compensation
M o v i e
A u t o
X X
X X X
X X X
X X X
X X X
X X X X