Pentax Optio E50 - Manual (Page 133)

131
8
Settin
g
s
You can save battery power by setting the LCD monitor to turn off
automatically when no operation is performed for a fixed time. After the
power saving function has been activated, you can turn the LCD monitor
on again by pressing any of the buttons.
1
Use the four-way controller (23) to select [Power
Saving] on the [H Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23)
to select [2min], [1min], [30sec],
[15sec], [5sec] or [Off].
4
Press the 4 button.
The Power Saving setting is saved.
Using the Power Saving Function
The default power saving function is activated 15 seconds after you
turn on the camera. When the power saving function is set to “2min”,
“1min” or “30sec”, the power saving function is activated after the
time set has passed.
How to display the [H Setting] menu
MENU
S e t t i n g
MENU
1 / 2
F o r m a t
S o u n d
D a t e A d j u s t
L a n g u a g e /
F o l d e r N a m e
U S B C o n n e c t i o n
E x i t
0 2 / 0 2 / 2 0 0 8
E n g l i s h
D a t e
P C
3 button
4 button
Four-way controller
S e t t i n g 2 / 2
MENU C a n c e l OK O K
Vi d e o O u t
Brightness Level
P o w e r S a v i n g
A u t o P o w e r O f f
G u i d e D i s p l a y
R e s e t 2 m i n
1 m i n
3 0 s e c
1 5 s e c
5 s e c
O f f