beautypg.com

Pitco Frialator Solstice I12 Water Cooker (Service Manual) User Manual

Page 20

background image

Solstice I12 Water Cooker Computer Service
Part #60153301

L22-306 Rev 0

20

key. Display returns to [FACTORY].

5.4

Diagnostic Menu Entry

Same as section 4.5 except [FACTORY] is displayed instead of [SERVICE].

5.5

Ready Level

With display showing [FACTORY], press product key 6.

Display shows [READY nn], where “nn” is the value, in degrees below set temperature that
the READY message is displayed. To change this value, use the location keys for numeric
entry of a new value.

Press the

key. Display now shows [FACTORY].

5.6

Operating Temperature Range

With display showing [FACTORY], press product key 7. This forces the control to display
the range of temperatures that may be set by operators.

Display shows [RANGE 1] [150 230]. No adjustments are permitted here. This is an

information display only. Press the

key. Display returns to [FACTORY].

5.7

High Limit Alarm Value

Pressing product key 8 forces the control to display the temperature above set
temperature
, the high limit alarm will sound. This is a display only value, no changes can

be made through the keypad. Press the

key. Display returns to [FACTORY].

Factory default value is 20°F, or 240°F absolute, whichever is less. This value can only be

changed by factory download at Pitco.

5.8

Test On/Off

With display showing [FACTORY], press product key [10/0].

Display shows [TEST xx], where “xx” is ON or OFF. If ON is selected, temperatures
displayed by the controller are probe tip temperatures unaltered by values set in section
4.1, or 5.1. For normal operations, this setting should remain OFF.

To change this value, use product key

to toggle choice (ON or OFF).

Press the

key. Display now shows [FACTORY].

5.9

To Exit Factory Menu (Level 4):

To exit Factory Programming, press the

key. Display will show [PROGRAM]. Continue with

settings in section 2 or 3, or exit in the next step.

To return to normal operations, press the

key again.

Display will show one of the normal displays: [HEATING] or [READY].