Pitco Frialator Solstice I12 Water Cooker (Service Manual) - Manual (Page 11)

Solstice I12 Water Cooker Computer Service
Part #60153301
L22-306 Rev 0 11
3.3 Beeper Volume and Tone:
Volume and Tone of the beeper alarm may be changed in this section. Volume ranges are 1,2 and 3,
where 3 is the loudest setting. Later model controls have an additional selection for tones.
With display showing [PROGRAM], press the product key . Display will show
[SELECT] [OPTIONS].
Press location key 3, display shows [VOLUME n] [BEEPER].
Use the product key to scroll through choices (n= 1,2,3, or T). Beeper volume will
change as each selection is made. Press key to save choice.
If “T” is selected above, an additional display is shown, [TONE n] [BEEPER]. Use the product key
to scroll through choices (n= 1,2,3). Beeper tone will change as each selection is made.
Press key to save choice. Display shows [PROGRAM].
3.4 Language Selection:
With display showing [PROGRAM], press the location key .
Display shows [SELECT] [OPTIONS].
Press product key 4, display shows [ENGLISH] [LANGUAGE].
Use the location key to scroll through choices (ENGLISH, ESPANOL, FRANCAIS,
DEUTSCH, HOLLAND).
Press key to save choice. Display shows [PROGRAM].
3.5 Recovery Test Value:
This controller maintains a record of heat up times for the appliance. A poorly running appliance will
have increased recovery times stored in this display. There is no selection done here, just the display
of recovery time values.
With display showing [PROGRAM], press the product key .
Display shows [SELECT] [OPTIONS].
Press product key 6; display will show [RECOVERY] [TEST].
Press the product key . Display will show [FnnnLyyy], where nnn is the factory
recovery value, and yyy is the last warm up recovery value.