Pitco Frialator Solstice I12 Water Cooker (Service Manual) - Manual (Page 16)

Solstice I12 Water Cooker Computer Service
Part #60153301
L22-306 Rev 0 16
With display showing [MORE] [SERVICE], press product key 1. Display will show [NOW
xxx] [COOK NOW], where “xxx” is ON or OFF. Use product key change value, then
press the to save choice. Display returns to [MORE] [SERVICE].
Note: With OFF value selection, operators must acknowledge a done cook [DONE nn ] display
before starting any another cooks.
With an ON value, operators are permitted to start a cook on the opposite side before
acknowledging a cook done alarm.
Example: The left display is showing [DONE 2] with the beeper alarm sounding. Indicator 2 is
flashing needing to be acknowledged. All other product indicators are off.
With a set value of OFF, no other cooks can start until product key 2 is pressed to
acknowledge and clear the cook done alarm.
With a value of ON set, a cook on the right side of the control (keys 7-12) may be started
before operator clears the cook done alarm for product key #2 on the left side.
4.7.2 Maximum Fill Time
This setting is the maximum amount of time to fill, or re-fill the tank. Refill times exceeding this
time will force an alarm [ FILL ] [FAILURE].
With display showing [MORE] [SERVICE], press key .
Display will show [ mm:ss] [ FILL ]. The factory default time is 20:00.
Use product key change value, then press the to save choice. Display returns to
[MORE] [SERVICE].
4.7.3 Heat Demand Profile
With display showing [MORE] [SERVICE], press key . Display will show [xxxxxxx]
[HEAT DEM], where xxxxxxx may be one of 3 heat control profiles listed below.
1. [GENERIC 1] for gas fired appliances. This is the factory default.
2. [GENERIC 2] for electric appliances.
3. [T-STAT] control operates as a mechanical thermostat for general purpose
applications on gas or electric fryers. This setting offers the quickest possible recovery
times at the expense of temperature overshoot suppression.
Use product key change value, then press the to save choice. Display returns to
[MORE] [SERVICE].