Pitco Frialator Solstice I12 Water Cooker (Service Manual) User Manual
Page 2
Solstice I12 Cooking Computer Service
Part #60153301
L22-306 Rev 0
2
1 Key Locations and Functions: ..................................................................... 4
1.1
To turn the appliance ON: .................................................................................. 4
1.2
To turn the appliance OFF:................................................................................. 4
1.3
To start a Cook:.................................................................................................. 4
1.4
To cancel a Cook or Hold: .................................................................................. 5
1.5
To check Actual and Set temperatures: .............................................................. 5
1.6
To View Current Settings for a Product Key: ...................................................... 5
1.6.1 Typical displays using the above key 4 as an example: ................................................5
2 To Enter Programming Level 1 (for the Store Manager): ........................... 6
2.1
To Set Cook Temperature: ................................................................................. 6
2.2
To Change a Product Key–Cook, Shake, Hold and Hold Pre-Alarm Times, and Name:
6
2.2.1 Cook Time ......................................................................................................................6
2.2.2 Shake Time ....................................................................................................................6
2.2.3 Hold Time .......................................................................................................................7
2.2.4 Hold Pre-Alarm ...............................................................................................................7
2.2.5 Product Key Naming:......................................................................................................8
2.3
Set the Food Safe temperature for this key: ....................................................... 9
2.4
To Exit Level 1 programming:............................................................................. 9
3 To Enter Programming Level 2 (for the Store Manager): ........................ 10
3.1
Fahrenheit or Celsius Display:.......................................................................... 10
3.2
To Change Password or Requirement.............................................................. 10
3.3
Beeper Volume and Tone:................................................................................ 11
3.4
Language Selection:......................................................................................... 11
3.5
Recovery Test Value: ....................................................................................... 11
3.6
Control or Timer: .............................................................................................. 12
4 To Enter Programming Level 3 (for the Technician) ................................ 13
4.1
Offset Temperature Display.............................................................................. 13
4.2
Minimum Cycle Times ...................................................................................... 13
4.3
Recovery Time ................................................................................................. 14
4.4
Diagnostic Menu Entry ..................................................................................... 14
4.4.1 Left Basket Lift Output ..................................................................................................14
4.4.2 Right Basket Lift Output................................................................................................14
4.4.3 Heat Demand Output....................................................................................................14
4.4.4 Side On Output.............................................................................................................14
4.4.5 Drain Switch Input ........................................................................................................14
4.4.6 Lamp Test.....................................................................................................................14
4.4.7 Heat Feedback Input ....................................................................................................14
4.4.8 Fill Done Input: .............................................................................................................15
4.4.9 Exit Diagnostic Menu....................................................................................................15
4.5
Ready Level ..................................................................................................... 15
4.6
Temperature Operating Range......................................................................... 15