Panasonic AG-DV2000P - Manual (Page 52)

Program Insert
This function is used to replace the picture and sound on a recorded tape.
Preparations
Complete necessary connections and settings.
See pages 24-33.
Example: Video Insert
Operations
Press EDIT MENU.
On Screen Display
Select Program Editing, and then
Press OK.
Notes:
Program Editing can be performed using either the tape
counter or Time code display.
If you attempt to switch to the tape counter display in order to
perform editing after setting the editing points using the Time
code display, the Erase all programs screen is displayed.
(The Erase all programs screen is also displayed when you
change from the tape counter display to the Time code
display.)
After setting a program, if you attempt to set another
program in a different editing mode, the set contents for the
previous editing mode remain on the setting screen. In
order to prevent editing errors, perform the Erase all
programs operation (page 61) whenever you set a program
under a different editing mode.
Program Editing can not be performed with a movie camera
that has a 4-digit counter.
Video Insert and Audio Insert are not possible in the
following cases:
When the tape in the recording VCR (this unit) is:
Recorded in LP mode;
Blank, or contains a blank portion in the middle.
52