Panasonic AG-DV2000P - Manual (Page 16)

Manual Recording
Operations Display Symbols
Insert a video cassette with the closed record
prevention tab (page 13).
If it has already been inserted,
press POWER (POWER ) to turn
the VCR on.
Press INPUT SELECT on this unit
so that A1, A2 or DV IN.
Press REC to start recording.
Press (STOP) to stop recording.
To Select the Desired Tape Speed
Press SP/LP before recording.
To Pause Recording
Press PAUSE/SLOW during recording.
Press again to continue recording.
To Select the Desired Audio Mode
Perform the procedure below using the editing controller.
1 Press SET UP.
2 Using , select Audio Mode and press OK.
3 Using , select 12bit or 16bit, then press OK.
For details, see Initial Settings for Editing on page 30.
Note:
A long-Mini DV cassette (SP/80 min., LP/120 min.) that was recorded by this VCR cannot be played back or recorded by a
DVCPRO or DVCPRO 50 format VCR.
16