Panasonic AG-DV2000P - Manual (Page 31)

One-Touch-Edit AV-IN Color Level
1 Press SET UP. 1 Press SET UP.
2 Select One-Touch-Edit.
On Screen Display
2 Select AV-IN Color Level.
3 Select OFF or ON. 3 Select SOURCE or ADJUST.
OFF: Select this whenever you are performing any SOURCE: Normally set this position.
editing function other than One-Touch-Edit. ADJUST: To adjust the color level of the input
ON: Select this in order to perform One-Touch-Edit. external recording source connected to A1
or A2.
One-Touch-Edit is possible only when EDIT CONTROL
is set to either DV or EDIT, and EDIT MODE is set to
RECORDER.
If you select ADJUST and then press OK, the AV-IN Color
Level screen is displayed.
4 Press EXIT to exit the On Screen Display. 4 Adjust the color level using
Press to make the color lighter
Press to make the color darker
The setting can be adjusted over a range of ±20.
5 Press SET UP, and then press EXIT to exit the On Screen
Display.
Notes:
If INPUT SELECT is set to DV IN, the Audio Mode,
AV-IN Color Level, and AV-IN Hue Level cannot be selected
on SET UP screen.
The AV-IN Color Level and AV-IN Hue Level can be selected
in following cases:
INPUT SELECT is set to A1 or A2;
When the VCR is in stop mode
31