Panasonic AG-DV2000P - Manual (Page 30)

Initial Settings for Editing
This VCR also allows some settings for editing to be made at the On Screen Display (OSD).
Preparations
Confirm that the monitor is on and the VCR viewing channel
is selected.
Complete necessary connections and settings.
See pages 24-29.
Search with Sound Audio Mode
1 Press SET UP. 1 Press SET UP.
2 Select Search With Sound. 2 Select Audio Mode.
On Screen Display
3 Select 12bit or 16bit.
3 Select OFF, EDIT ONLY or ALWAYS ON.
OFF: The sound cannot be heard during special
playback.
EDIT ONLY: The sound can be heard during special
playback only when an editing operation is
in progress.
ALWAYS ON: The sound can be always heard during
special playback.
4 Press EXIT to exit the On Screen Display.
12bit: Divides the audio area into two stereo
audio tracks, STEREO1 and STEREO2.
If a recording is made in 12bit audio
mode, the sound is recorded on
STEREO1 only, and is not recorded on
STEREO2. STEREO2 is used to record
new audio that is added through Audio
Dubbing or Audio Mixing.
16bit: Uses the entire audio area in order to
record audio with greater quality.
4 Press EXIT to exit the On Screen Display.
30