Panasonic AG-DV2000P - Manual (Page 21)

3D Y/C Mode To Set the Color Mode
1 Press MENU, and then select OPTION SETUPS. 1 Press MENU, and then select OPTION SETUP2.
2 Select 3D Y/C MODE.
2 Select COLOR MODE.
3 Select OFF or ON.
3 Select OFF or ON.
OFF: To reduce ghosting that occurs when playing
back or recording a fast-moving video.
ON: To record with high quality.
OFF: When performing recording and playback in
black-and-white.
ON: When performing recording and playback in color.
4 Press MENU twice to exit the On Screen Display.
4 Press MENU twice to exit the On Screen Display.
3D NR Mode
1 Press MENU, and then select OPTION SETUP2.
Initial Setting
If you want to return the VCR to the factory-preset condition,
follow the procedure below.
1 Press MENU, and then select OPTION INITIAL.
2 Select 3D NR MODE.
The message “INITIAL COMPLETED.” appears at the
bottom of the screen.
3 Select OFF, LEVEL1 or LEVEL2.
2 Press MENU to exit the On Screen Display.
OFF:
LEVEL1 :
LEVEL2:
To use this VCR as the playback unit
during editing.
To get better picture quality during
playback.
When there is a lot of picture noise on the
screen.
4 Press MENU twice to exit the On Screen Display.
21