Philips AXIS 5900 User Manual
Page 48
Adding Printers in Macintosh
48
AXIS 5900 User’s Manual
6. Write a text file containing the parameters you want to set:
Note:
7. Print the text file. The settings will be stored in the print server.
8. Open the Chooser and select the printer port you wish to use for printing
documents.
9. Close the Chooser.
Note:
BINARY_TYPE_1.
:BCP
INT_ADDR.
:192.168.3.191
ATYPE_1.
:EPSONLQ2
Parameters that you do not want to set should be excluded from the text file. Refer to the
Parameter list in this manual for information about which values that are valid for each
parameter.
The _CFG port disappears 60 minutes after the AXIS 5900 has been powered on. If you want it
to reappear, you must restart your print server.