Psion Teklogix Netbook Pro none - Manual (Page 120)

Chapter 7: Configuring Communications
NETBOOK PRO Bluetooth Settings
100 Psion Teklogix NETBOOK PRO User Manual
After the PIN has been validated, you will see an asterisk (*) in the PIN column in
the Devices list box, indicating that this device has a PIN set. Once a PIN is entered,
it is saved in the registry. To remove the PIN, press Set PIN, then .
If the NETBOOK PRO tries to connect with a remote device for which no PIN has
been set but requires a PIN, and has Authentication enabled, you will be prompted to
verify the PIN. The Authentication Request dialogue will appear. Enter the PIN,
press OK, and the devices will be connected.
7.3.1.2 Servers Menu Page
The Bluetooth connection is initiated from your NETBOOK PRO to the remote
device, therefore the NETBOOK PRO is called the ‘client’ and the remote is called
the ‘server’. The Servers menu shows the server profiles that can be activated in
your NETBOOK PRO. There is currently one server profile available: Serial.
Place a checkmark in the checkbox to activate the server and it will show the associ-
ated port name beside the server name. The port name also follows the convention
under the Property menu (see Section 7.3.1.3). Once you activate a server profile, it