Psion Teklogix Netbook Pro none - Manual (Page 115)

Psion Teklogix NETBOOK PRO User Manual 95
Chapter 7: Configuring Communications
Bluetooth Radio Configuration
6. IEEE 802.1X is an authentication protocol that can be used with IEEE
802.11b networks. Currently, MD5 Challenge, PEAP, and TLS are the
EAP (Extensible Authentication Protocol) types supported by the
NETBOOK PRO. The EAP type setting must match the configuration of
the RADIUS Server on the wired network. In addition to this, the access
point must support IEEE 802.1X and must be configured appropriately.
7. Selecting Advanced in the Wireless Information tab will allow you to
configure the types of networks for connections.
8. Click on OK to save your settings. These settings can also be changed
by entering the Control Panel and clicking on Network and Dial-Up
Connections, then on the adaptor name.
7.3 Bluetooth Radio Configuration
Bluetooth is a global standard for wireless connectivity for digital devices. The tech-
nology is based on a short-range radio link that operates in the ISM band at 2.4 GHz.
When two Bluetooth-equipped devices come within 10 meters’ range of each other,
they can establish a connection. Because Bluetooth uses a radio-based link, it
doesn't require a line-of-sight connection in order to communicate.
The following menus provide the configuration settings for the Bluetooth
radio card.
Note: The Bluetooth radio card uses an internal antenna.