Locating back panel components – Palm VII User Manual
Page 15

Chapter 1
Page 7
Locating back panel components
Stylus
Slides in and out of the slot in the back panel of
the organizer. To use the stylus, remove it
from the slot and hold it as you would a pen or
pencil. Unscrew the top of the stylus to access
the reset tool.
Reset button
Under normal use, you should not have to use
the reset button. See Appendix A for
information about when and how to use the
reset button.
Contrast
control
Adjusts the appearance of the screen for the
clearest screen display. Depending on the
lighting conditions or temperature of the
environment where you use your organizer,
you may need to adjust the setting of the
contrast control.
Battery door
Covers the AAA batteries that power your
organizer and charge the transmitter. See
“Installing the batteries” later in this chapter
for information on removing the battery door
and installing batteries.
Reset
button
Serial
port
door
Stylus
Battery
door
Contrast
control