Precor Low-Impact Threadmill M9.57 - Manual (Page 72)

Owner’s Manual: Maintenance 70
• If the belt is off center to the LEFT, turn the adjusting
bolt ¼ turn counterclockwise, which moves the
running belt to the right.
• If the belt tracks off center to the RIGHT, turn the bolt
¼ turn clockwise; this moves the belt to the left.
Important: Do not turn the adjusting bolt more than ¼
turn at a time. Overtightening the bolt can damage the
treadmill.
2. Recheck the alignment of the running belt by repeating
the steps found in Checking the Alignment of the
Running Belt.
Long-Term Storage
When the treadmill is not in use for any length of time, turn it
Off. Make sure that the power cord is unplugged from its
power source and is positioned so that it will not become
damaged or interfere with people or other equipment.