Precor Low-Impact Threadmill M9.57 - Manual (Page 62)

Owner’s Manual: Advanced Programming and Troubleshooting 60
Changing Treadmill Settings
Through a specific set of number key presses, you can
customize the pause or cool down times and adjust the
maximum limit for the running belt speed.
To access the menu and change the settings, perform the
following steps:
1. At the Precor banner, press the following keys in
sequence without pausing between selections:
PAUSE/RESET, 5, 6, 7, 1
Numbers appear on the display as you press the
associated key.
Setting a Pause Time Limit
You can limit how long a user can pause while exercising on
the unit by entering a time between 1 and 120 seconds (two
minutes). For example, if you set the pause time limit to 60
seconds, the display automatically resets to the Precor
banner if no key press occurs within one minute.
2. At the SET MAX PAUSE TIME prompt, press OK. Use
the navigational arrow keys to change the time limit.
Choose between 1 and 120 seconds (two minutes).
3. When you are ready, press OK to accept the displayed
setting and move to the next program. Or, press PAUSE/
RESET to return to the Precor banner.