Panasonic KX-FLM600 - Manual (Page 82)

82
Setup (PC)
Connecting to a computer !
To run the Panasonic Multi-Function software (PANA LINK), you need the following software and hardware.
CPU: An IBM compatible personal computer with a 486 or higher processor (Pentium is
recommended.)
Basic Software: Microsoft Windows 95 or Windows 98 (Windows 3.1/3.11*—printer driver only)
Memory Minimum: 16 MB (32 MB or more is recommended)
Hard disk:
More than 40 MB available space
Other: Parallel port
Panasonic Multi-Function fax machine
*Microsoft Windows operating system Version 3.1/3.11 (hereafter Windows 3.1/3.11)
Connect your personal computer to the fax machine as follows:
Printer cable
(Parallel cable)
Caution:
≥ When connecting the fax machine to your computer, use the included printer cable for reliable data
communications and compliance with FCC rules.
≥ Do not connect the printer cable to the serial port on the computer. This may cause damage to your fax
machine and computer.
To parallel port