Philips VR700/58 - Manual (Page 9)

Initial installation
a Open up the battery compartment of your remote control
and place the batteries in it as shown in the picture.
b Close the battery compartment.
c Confirm the picture on the TV screen with the OK button
on the remote control.
d Select the language for the on-screen display (OSD) with
the
P = or P ; button.
The display on the video recorder will only show English
text.
e Confirm with the OK button.
f Select the country of your residence with the P = or
P ; button.
If this country does not show up, select ’OTHERS’.
Confirm with the
OK button.
g If you have connected the aerial to the video recorder,
press the
OK button.
’Automatic TV channel search’ starts. This picture will
appear on the screen:
INSTALLATION
AUTOM. SEARCH
YOUR VIDEORECORDER
IS NOW SEARCHING FOR ALL
AVAILABLE TV CHANNELS
02 TV CHANNELS FOUND
PLEASE WAIT
Wait until all TV channels have been found. This can take
several minutes.
h When all TV channels have been found, ’AUTOMATIC
SEARCH COMPLETE’ will appear on the TV screen.
E ’TIME’, ’YEAR’, ’MONTH’, ’DATE’ will appear on the TV
screen.
AUTO. SEARCH
AUTOMATIC SEARCH COMPLET
XX TV CHANNELS FOUND
TIME 20:00
YEAR 1998
MONTH 02
DATE 06
________________________________
TO CONTINUE
PRESS
OK
i Check if the TIME in line ’TIME’ is correct. If required,
change the time with the number buttons
0-9 on your
remote control.
j Check ’YEAR’, ’MONTH’ and ’DATE’ in the same way. To
select between the fields, use the
P = or P ; button.
k When all the information is correct, confirm with the
OK button.
l To end, press the MENU button.
The initial installation is now complete.
D If you have connected a decoder, you must install it
as described in the next section.
D If you have connected a satellite receiver, please
read the section ’satellite receiver’.
Allocating a decoder
Some TV stations will send coded TV channels, that you can
only watch when you use a decoder. You can connect such a
decoder (descrambler) to your video recorder. With the
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.
D With ’Connecting with scart cable and ’Easy
Link/NexTView’ the decoder must be activated for
the TV set.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Choose the television channel on which you wish to use
the decoder with the
P ; or P = buttons on the video
recorder or the number buttons 0-9 on the remote
control.
c Press the MENU button on the remote control. The main
menu will appear.
2. INSTALLING YOUR VIDEO RECORDER
7