Switching on ’direct record – Philips VR700/58 User Manual

Page 20

Automatic recording from a satellite
receiver (SAT RECORDING)

You can only use this function, when you have a satellite
receiver, which can control other equipment by a
’programming’ function through a scart cable.

Switch on the TV set. If required, select the programme
number for the video recorder.

Press the

button. The main menu appears.

Select the line ’RECORDING FUNCTIONS’ with the

P =

P ;

button, and confirm with the

button.

Select the line ’RECORD SETTINGS’ with the

P =

P ;

button, and confirm with the

button.

Select the line ’SAT RECORDING’ with the

P =

P ;

button.

Select the required scart socket ’E1’ or ’E2’ with the

button.

If you want to switch off the function, select ’OFF’ with
the

button.

Confirm with the

button.

Use a scart cable to connect the scart socket you
selected on the video recorder (

EXT.1 AV 1

EXT.2 AV 2

) to the corresponding scart socket on the

satellite receiver.

Insert a cassette.

Switch off with the

STANDBY m

button. The video

recorder is now ready to record. The beginning and end
of the recording is controlled via one of the scart sockets.

D When this function is switched on and the video

recorder is switched off, ’

’ will appear on the

video recorder display.

Switching on ’Direct Record’

When this function is switched on, the video recorder will
automatically record the programme selected on the television
by means of a scart cable.

D The video recorder must be switched off .
D With ’Connecting with scart cable and ’Easy

Link/NexTView’, the video recorder will also take the
programme number from the TV set automatically
with the video recorder switched on.

Switch on the TV set. If required, select the programme
number for the video recorder.

Press the

button. The main menu appears.

Select the line ’RECORDING FUNCTIONS’ with the

P =

P ;

button, and confirm with the

button.

Select the line ’RECORD SETTINGS’ with the

P =

P ;

button, and confirm with the

button.

Select the line ’DIRECT RECORD’ with the

P =

P ;

button.

Select the function ’ON’ with the

button. If

you select ’OFF’, the function will be switched off.

Confirm with the

button.

To end, press the

button.

Switch off with the

STANDBY m

button.

On the TV set, select the programme number you want
make the recording from.

Press the

RECORD/OTR n

button with the video recorder

switched off.

D Don’t select another programme number on your TV

set, until the ’search symbol’ in the display of your
video recorder disappears. This can take up to one
minute.

D When ’NOTV’ appears in the display, the programme

number could not be found. The video recorder
switches off automatically. In this case, read the
section ’Recording without automatic switch-off’.